What Are the Best Shower Surrounds for Old House
Bathroom Ideas: Replace Tub and Shower Faucet Trim
Simply replace the visible trim for an brand new appearance
Alter out tub/shower control handles and spouts to achieve a make new look, without redoing the valve plumbing. Apply a elementary replacement kit.
You might besides like: TBD
Modify out the tub/shower valve trim
Photo 1: Remove the handle
Pry the comprehend off the shower handle, then remove the screw under the cover and slide the handle and escutcheon off.
Photo two: Remove the spout
Remove the tub spout by turning information technology counterclockwise or by unscrewing a setscrew and pulling it off.
Photo 3: Reassemble with new trim
Fasten the trim ring with the "H" mark on the left, and then screw on the residue of the shower faucet replacement.
Over time, the metal on tub and shower controls and spouts can become tarnished and dull-looking despite all efforts to make clean and shine it. An like shooting fish in a barrel way to solve the problem is to just install new trim.
Almost whatever tub spout and showerhead tin be replaced by unscrewing the sometime ane and screwing on a replacement. The handle and trim for the tub/shower controls tin also normally be replaced without redoing whatever plumbing by using a universal replacement kit (available for most brands at home centers and plumbing supply stores). If you're unsure what kind of shower handle or faucet replacement to buy, but take the old handle and trim to a plumbing supply shop to find a matching replacement.
Turn off the h2o supply, and then remove the shower handle and trim (Photo 1). Most shower handles have a removable cap roofing a screw that holds the handle on; otherwise, expect for a setscrew under the handle.
Tub spouts (faucets) unscrew (Photograph 2), or pull off if they have a setscrew underneath. You may need to utilize two easily or fifty-fifty a wrench to unscrew them if the spout was caulked. Supersede the spout with i that'due south threaded or attached in the same way, or buy a universal-type replacement spout that comes with adapters to fit any configuration.
Make clean old caulk and clay off the wall before installing the new controls and spouts. Adhere the shower handle replacement and trim in the reverse lodge that you took them off (Photo 3). Caulk the wall under the rim of the escutcheon plate with acrylic caulk before y'all tighten information technology down, when it'due south roughly ane/four in. away from the wall. Leave a 1-in. gap at the bottom, and so wipe off excess caulk after the plate is tightened down. Cheque out some really cool showerheads you lot could add as a replacement.
Replacement Trim Kit
A new trim kit contains a handle and escutcheon plate, a showerhead, a tub spout and an overflow cover.
Required Tools for this How to Change Shower Handle Project
Have the necessary tools for this DIY how to change shower handle projection lined up before yous first—y'all'll save fourth dimension and frustration.
Required Materials for this How to Modify Shower Handle Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here'southward a list.
Source: https://www.familyhandyman.com/project/bathroom-ideas-replace-tub-and-shower-faucet-trim/
Post a Comment for "What Are the Best Shower Surrounds for Old House"